Myler Flat Shank MS.09 (Level 1)
Myler comfort bit, Level 1 – Flat Shank.
- Level: 1
- Mouthpiece: 09 / Sweet Iron (sweet iron) / 11mm
- Cheekpieces: Flat Shank / stainless steel / upper arm 60mm - lower arm 125mm
Myler Flat Shank MS.09 (Level 1): comfort bit by Myler (Level 1) with a wide barrel and copper inlays. The leverage bit has flat shanks of stainless steel; the leverage results from the ratio of upper to lower arm.
Why Myler Flat Shank?
Myler bits are comfort snaffles and bits with a wide barrel and copper inlays; with us they come via the importer PFIMA. Level 1 (according to Myler): mouthpieces that rotate onto the tongue and usually allow independent side movement; meant for young or green horses with a more challenging disposition or for disciplines that only allow single-jointed mouthpieces. Which level fits depends on the horse and its training – most horses can skip Level 1 and start with Level 2, 2-3 or 3. We are happy to advise you.
Key facts
- Level: 1
- Mouthpiece: 09 / Sweet Iron (sweet iron) / 11mm
- Cheekpieces: Flat Shank / stainless steel / upper arm 60mm - lower arm 125mm
- Sizes: 12.7 cm (5")
- Wide barrel with copper inlays
How to use
- Before use, oil the hinges and joints between mouthpiece and cheekpiece on mouthpieces or cheekpieces of sweet iron so that no moisture gets in.
- After use clean the bit thoroughly – your horse will appreciate a clean bit the next day.
- Do not oil a wet bit, otherwise the moisture is sealed in.
Our tip
Have your horse's teeth and mouth checked regularly and choose level and mouthpiece to suit training and mouth.
Good to know
The bit does not replace expert instruction – ask a trainer or vet if in doubt.
| Manufacturer | TOKLAT Originals, Inc. | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Postal address | 9780 SW Freeman Dr #600 Wilsonville, OR 97070 USA | ||||||||||||||||||||||||
| Contact | info@toklat.com | ||||||||||||||||||||||||
| Responsible person in the EU | PFIMA GmbH Bäderstr. 4 56357 Pohl Tel.: +49 (0) 6772 300 3139 E-Mail: info@pfima.de | ||||||||||||||||||||||||
| Product identification | 89-11095 | ||||||||||||||||||||||||
| Safety information & warnings | Risk assessment category: Bits and accessories
1 = very low / 2 = low / 3 = moderate Risk assessment: low risk – a simple product description is sufficient. Warnings (1*) Please check the function of the bit before every ride. This is for your safety and the safety of your horse (2*) Not suitable for children under 6 years or only under adult supervision - risk of injury (3*) If your horse is prone to allergic reactions, e.g. to copper or nickel, we recommend seeking advice from a vet or equine dentist. (4*) Durability depends on the type and frequency of use |
